|
NOTE: If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified
individual in order to avoid hazard.
The model and serial numbers
will be required in
the event
that you need to obtain service
or parts for your snack machine. The numbers are on the
identification plate located on
the backside of the vending machine. Record the numbers on the space
provided below. Refer to
these numbers on all
correspondence and inquiries
about this snack vendor.
Remove the "Knock-A-Way
support by placing a 2x6 under
the vending machine. Insert a large
screwdriver or prying tool into
the groove and split it in two.
Turn the leveling screws as far
as possible. See FIGURE 1.
|
Figure 1.
|
