|
To load
products in the snack vending machine, lift the tray slightly and
pull forward until the tray stops. The
uppermost trays tilt for easier loading.
Load product from front to back making
sure all items fit freely between the selection springs.
Do no attempt to force oversize items or
packages into the spaces. Do not skip a
space. Place the product on the bottom of the compartment on the selection
spring with the label facing the front of the snack machine for easy
identification by the customer. See FIGURE 2.
The size of the item being vended
must be larger than the diameter of the
auger being used to vend properly.
Undersize items could cause vend
problems. If the product does not fit the spring properly, use a different pitched
spring. See Table 1 for spring/augers available from your vending machine
distributor or service entity.
TABLE 1.
AVAILABLE AUGERS
|
|
