General Maintenance for your Snack Vending Machine

ONCE A MONTH

When ordering parts for your vending machine, include the following:
1. The model and serial number of the snack machine for which the parts are needed.
2. Shipping address.
3. Address where the invoice should be sent.
4. The number of parts required.
5. Always refer to the pertinent parts and/or parts manual for the correct part number and description of a specific part.

When RIGHT or LEFT is used with the name of a part, it means that the person is facing the machine with the door closed.

6. Any special shipping instructions.
7. Carrier desired: air or air special, truck, parcel post or rail.
8. Signature and date.

9. If a purchase order number is used, then be sure it is visible and legible.
Mail your order to:
VendNet™
165 North 10th Street
Waukee, IA 50263
USA
All orders are carefully packed and inspected prior to shipment. Damage incurred during shipment should be reported at once and a claim filed with the terminating carrier.
If you do not have the correct parts manual, contact Vendnet™.
If you have any questions, check out our website www.vendnetusa.com or call VendNet™. Ask for the Parts Department. We will be happy to assist you. Our email is vendnet@vendnetusa.com.

BEFORE CALLING FOR SERVICE

Please check the following:

• Does your vending machine have at least 6 inches (15.2 cm) of clear air space behind it?
• If the power is turned on at the fuse box, is the machine the only thing that does not work?
• Is the vending machine plugged directly into the outlet?
WARNING: Do not use extension cords. Extension cords can cause problems.
• Is the circuit breaker at the fuse box reset?

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.

Vend net
WITTERN GROUP COMPNV
165 North 10th Street
Waukee, IA 50263
United States of America

CLEAN CABINET INTERIOR
Wash with a mild detergent and water, rinse and dry thoroughly. Odors may be eliminated by including baking soda or ammonia in the cleaning solution. Plastic parts may be cleaned with a quality plastic cleaner. Remove and clean Condensate Drain Hose to eliminate any deposits that may restrict condensate water flow. The vend mechanisms must be kept clean. Any build-up can cause the mechanisms to malfunction. Do not get the cleaning solution on electrical components. To insure proper vending keep delivery slide area free of dirt and sticky substances.
CLEAN CABINET EXTERIOR
Wash with a mild detergent and water, rinse and dry thoroughly. Clean occasionally with a quality car

PARTS ORDERING PROCEDURE